An issue may need to be fixed if you’ve ever had poor-quality internet when connecting to your Xfinity modem router. Is the light on your Xfinity router blinking orange? A blinking orange light indicates that your router is updating its firmware, which might be in the download or installation stages. Other causes of Xfinity routers blinking orange include internet connection issues, localized internet outages, or broken ethernet or coaxial cables. Fortunately, most reasons for the Xfinity modem light blinking orange are simple to fix. However, other causes, such as localized internet failures, are outside of your control, so you’ll need to wait for the engineer to come. In this article, we’ll go over the most common reasons for blinking orange lights in Xfinity routers and the steps you may take to fix them.
It would be best to explore the blinking router’s root cause before fixing an orange blinking light on the Xfinity modem router. An orange light indicates that your router is taking excessive time to connect to the internet. If the router continues to blink, it is having difficulty generating a smooth connection, or it is inadequate. Another cause of a blinking orange light is that the router is updating its firmware, which typically takes 15 to 30 minutes. Your router has an issue that must be resolved if it blinks for an extended time. The following are some of the possible causes of your router blinking orange.
- The router is experiencing problems connecting to the internet.
- The router has difficulty communicating with other devices and connecting to the network.
- There is an issue with the software or firmware.
- Outage or maintenance that is scheduled.
- Cables that are loose or defective.
- Heater problems.
- The Splitter has been damaged.
- Inadequate heat dissipation.
The following procedures might help you fix an orange blinking light on an Xfinity modem and/or router.
1. Be Patient And Wait For The Update To Finish
Give it half an hour and observe whether the light changes before concluding that your router is damaged and cannot be repaired since it blinks orange. This is because the Xfinity gateway may need to update its firmware, which is the primary source of a blinking orange light, and this might take a long time to complete. This solution is critical since firmware upgrades are critical to the integrity of your Xfinity modem router and your internet connection. Your router may only be able to access the internet with the latest firmware upgrades. If the orange light continues to blink after half an hour, there is a problem with your router. To fix your Xfinity modem router, in this case, you need to explore the solutions listed below.
2. Check For Outage
Sometimes, the problem with your router is beyond your control, which can be aggravating. Suppose your Xfinity modem router has been blinking for more than 30 minutes. In that case, your area may be experiencing a system outage, or your internet service provider may be experiencing a problem and doing maintenance. You may check several websites, including Xfinity’s, to see whether there is a local system or power outage. If you have your login information, you may quickly access Xfinity’s outage map online, which is simple. Also, if you need help checking the outage map, you can contact Xfinity directly and inquire about an outage in your area. If no outage exists, you should try resetting your router.
3. Soft Reset The Xfinity Modem Router
You can execute a soft reset on your router whether or not your internet is functional. The connection between the servers accomplishing the upgrade and the Xfinity router will be severed. The steps to take are outlined below.
- Unplug your modem and router. Even if the issue is limited to the router, performing a soft reset on both devices is suggested.
- After a few minutes, plug the modem back in.
- Wait for the modem’s LEDs to illuminate. Once the connection is live, plug in the router.
- The router should now light up. Check to see if the orange light has gone out.
Even if the orange light is gone when the router restarts, the upgrade may bring it back. If the orange lights cease flashing, the upgrade may be complete. However, you should watch out to see if the blinking occurs again, and if so, you may perform a hard reset.
4. Hard Reset The Xfinity Gateway
Well, if the orange light is still blinking and the router isn’t operating, you must do a hard reset. Fortunately, you won’t need the internet to do this. You’ll need an unfurled paper clip and something similar to push the button. Some Xfinity routers feature buttons, while others have pinholes. You need to push and hold the button until your router resets, whichever one it has. After that, the router will be reset to its basic factory settings and will reboot in a few minutes. You will need to reset any previous customizations.
5. Check Wired Connections
Cables and wires might have issues that go unnoticed for a long time. Less teaching is needed throughout the diagnosing process. Determine which wires extend from your Infinity device; these wires are coaxial and ethernet cables. Examine them to ensure they are firmly attached. One end of the ethernet cable’s connecting pin might become loose, allowing the connection to slip. Coaxial cables sometimes have bent pins within the spherical ends, making strong connections nearly difficult. After examining the wire ends, ensure that there are no frayed or exposed wires throughout the length of the cables, which might interrupt your connection. Check whether the blinking orange light changes after performing this quick cables and wires inventory. If it doesn’t work, move on to the next solution.
6. Try Ethernet Connection
If you still have issues with your Xfinity router, you can connect the router to the computer using an ethernet connection. You can determine if your wireless network has a connection problem by avoiding probable wireless issues. Check if the blinking orange light remains after connecting the router to the computer with your ethernet wire. Your router is the issue if the issues persist.
7. Inspect Splitter
Whether you have a TV or internet bundle, check whether the coaxial Splitter is faulty. Like any other electrical device, the Splitter is subject to wear and strain. If it is damaged, it may impact your internet connection. You need a replacement if the Splitter is damaged. If there is no fault, clean it and re-plug it.
8. Check The Router For Overheating
Routers and modems need appropriate cooling to perform properly. This always depends on vent fans to remove heated air from the router. As a result, check the temperatures of your Xfinity devices. You don’t need to look for the thermometer; touch the case of your device. If the router feels warm, it might be overheating, which could be the source of the problem. When you see your device overheating, unplug it or turn it off. Allow it to cool for 30 minutes to an hour. Then, wipe away debris or dirt from the router using a dry rag and/or paper towel. You may also clean the vents with pressurized air or a handheld vacuum. When you clean the vents, and your device is back to normal room temperature, turn on the router and check to see if it’s working again.
9. Check For Firmware Update
Problems with compatibility arise if your router is incorrectly set up or is operating on old firmware. As a result, go to the official website and check for the most recent firmware version. Download and install the most recent update from the admin site.
10. Check If Your PC Meets The System Requirements Of The Router
Whether there are no internet issues after you set up your Xfinity router or it is blinking orange, check your computer to see whether it meets the router’s system requirements. The Xfinity router may not function properly when your computer does not satisfy the system requirements. This means you will need better speeds and stronger signals. The fundamental needs are as follows.
- CPU – Quad-Core Intel Core i5
- Operating System – Mainstream Microsoft or Apple-supported OS
- Ethernet – Cat5e Ethernet cable or Cat6
- Browser – Firefox, Safari, Chrome, or Internet Explorer
To resolve the Xfinity router blinking orange, upgrade the PC components. Keep in mind that system requirements may based on the Xfinity router type.
11. Contact Customer Care
If all solutions have failed, you may need a specialist to examine your device or purchase a replacement. You can fix certain issues on your own at times. However, if you have tried all of the solutions and, your Xfinity device is still blinking orange, and you cannot establish an internet connection, you should contact a specialist or replace your gear. Some individuals believe that a new Xfinity modem or router cannot be broken, yet there are reconditioned devices available from internet service providers. As a result, it is conceivable that some of these reconditioned routers still have undetected pre-existing defects. A professional will analyze the problem and either fix it or give advice if they cannot.
Because of problems with your Xfinity router or modem, you do not have to battle to access a reliable internet connection. The solutions in this article might help you solve the problem of an Xfinity modem router blinking orange. If your router is blinking orange, it is most likely undergoing an upgrade, and you should give it some time before acting. However, the blinking will continue if your internet connection is disconnected or poor. Resetting the router and modem normally solves the problem and restores the connection. If the problem persists, you can try all the other solutions in the article, including contacting customer service for a final solution, which could be a replacement device. Don’t freak out the next time you notice the orange blinking light on the Xfinity router. A simple solution is just around the bend.